It will automate the workflow from design to NC code. With this piece of software you can make the parts faster with the automated CAM. Use collision avoidance for trimming the toolpaths and tilting the tools. NET updates the toolpaths for you to help avoiding collisions with heavy-duty machinery.
You can change the center drill geometry and it also includes quicker way of creating as well as editing setups and an improved thread library. Now you can store, preview and share your 2D as well as 3D design data securely. Moreover, it optimizes CNC programs to multitask turn-mill centers and to reduce cycle times. May make the parts quicker with the automated CAM. Has various new capabilities for applying feature recognition. Attainable that will automate the system from design to NC code.
May store, preview and share your 2D as well as 3D design data securely. Has the automatic recognition of holes, bosses, sides and pockets for faster programming. Supports 3, 4 and 5-axis CNC mills with a tremendously wide range of mechanical specifications.
Is able to standardize and produce the results that you need with libraries, attributes and configurations. Allows you to select your tools, step over, step down and more. In order to trim the toolpaths, tilt the tools. Bluntly reduces the programming time and produce results for CNC milling, turning and wire applications.
May change the center drill geometry and it also includes quicker way of creating along with editing setups and an improved thread library. Software Full Name: Sunday, April 22nd,
FeatureCAM contains the following new features and enhancements: Feature recognition Directed AFR: Use Directed Automatic Feature Recognition to specify which features you want FeatureCAM to automatically recognise. Directed AFR lets you recognise more features simultaneously in addition to providing an improved selection mechanism for specifying which recognized features to keep. Autodesk Fusion (requires active FeatureCAM or Fusion Subscription) Share results with stakeholders using Moldflow Communicator so they can more easily visualize, quantify, and compare simulation results. Buy official Autodesk software online. Get prices for Autodesk products, including AutoCAD, Inventor, 3ds Max, Maya, Revit, Fusion and more.
FeatureCAM contains the following new features and enhancements: Feature recognition Directed AFR: Directed AFR lets you recognise more features simultaneously in addition to providing an improved selection mechanism for specifying which recognized features to keep. Back Cutting Back Cutting strategy: There is a new Turning strategy available called Back Cutting.
This strategy is for use with specialized tools that allow the toolpath to work from the spindle to the face of the part. It also runs at higher speed and feed values, so it can reduce machining time. Radial patterns Index stock: Index the stock for each instance of a radial pattern using the new Rotate C for each instance check box on the Pattern Properties dialog. Swiss Turning Fixed inclined tools: FeatureCAM now supports fixed inclined holders where the rotation component of the holder is rotated manually by the machine operator.
MD files from previous versions of FeatureCAM will be set to Programmable by default to ensure that existing behaviour is maintained.
Part Handling: There is a new Eject feature type when creating a Part Handling feature. This lets you easily insert an eject feature anywhere in the program, independent of other operations. Threading Thread from path: When creating turn threading features, there is a new Thread from path option which lets you create more complex threaded shapes. Select this option, then select a curve to define the path of the thread. Chamfer on exit: When creating turn threading features, you can now specify the chamfer length and chamfer angle.
Select Do chamfer on exit at the machine level or feature level to allow FeatureCAM to use a chamfer move when exiting a threading feature. Standard Thread list: When creating turn, mill, and hole threading features, the Standard Thread list is now split into two. When you select a thread standard from the Standard list, the Size list is populated by all sizes available for that standard.
Previously all thread standards and sizes were merged into one list. Thread types: Other manufacturing improvements Creating patterns: Turning view modes: Center drill: You can now change the angle of the cutting portion of a center drill using the new Included angle field.
The Helical Side finish option lets you use a continuous spiral for the Finish pass, and control the tightness of the spiral by entering a Pitch. Curvature analysis: The interactive curvature-analysis tool now reports the draft angle as well as surface normals and curvatures, which simplifies the evaluation of drafted surfaces. Usability improvements Setups: The Setup Wizard is replaced by the tabbed Setup Properties dialog. Edges are included in the set of recognised selections when defining the orientation of a Setup.
When aligning the Setup in the Graphics window, you no longer need to specify what you are going to pick, ahead of picking points. Snapping grid: The appearance of the snapping grid has been modernized and there are new options that let you customize it further: The snapping grid is now displayed as lines by default. The snapping grid redraws dynamically as you zoom. You can change to fixed spacing in the Spacing section of the Snapping Grid page.
Operations List: There are a couple of updates to the Operations List: If automatic updating is turned off, you can click the new Update Now button on the Op List tab of the Results window to update the Operation List when you've made changes to your part. You can now choose which speed units are shown for all operations in the Operation List.
Tool Posts: The colors, icons, and layout of the Tool Posts view have been updated to improve ease of use. Selection icons throughout the interface have been updated to make them more easily distinguishable and recognizable. Reporting errors: You can now opt-in to send more files with your error reports.
Sending these extra files means we are more likely to reproduce your error and correct the problem. Shared Views improvement Shared views: Manufacturing features and stocks that are visible in the application window are now displayed in the shared view.
Fusion Production Send to Fusion Production: After you have loaded the Fusion Production add-in , you can easily group and send Setup sheets to Fusion Production. Fusion Production combines production management features including scheduling, job tracking, and machine monitoring, to help you understand the current shop-floor status, identify underperforming processes, and make decisions to improve overall equipment effectiveness.
Subscribe to Fusion Production to send Setup sheets. Import and PMI bit file compatibility: This release supports the loading of legacy bit FeatureCAM part files. This does not affect part files saved from FeatureCAM , , or versions, but may affect files from earlier versions.
Importing CAD models: PMI support: Post-processors Post-processor files: The following functionality is not supported when a.